Due to emergency gas main repairs, we once again need to inform our customers that reaching us by car is more complicated than usual. For detailed instructions, please click here

Call today 01932 873529
Open 8.30am until 1pm and 2pm until 5pm, seven days a week

Lighting > Torches

Fenix HP25R Rechargeable Headlamp

The Fenix HP25R Headlamp is the new standard in rechargeable headlamps. Offering nine modes between a neutral white floodlight, spotlight and red light, this headlamp will easily meet any need while h


suitable for
Duke of Edinburgh Awards activities Forest Schools Association activities Hiking Camping bushcraft Expeditions

Select Quantity :

The Fenix HP25R Headlamp is the new standard in rechargeable headlamps. Offering nine modes between a neutral white floodlight, spotlight and red light, this headlamp will easily meet any need while hiking, camping, search and rescue and even cave exploration. The battery level indicator will let you know when it’s time to recharge via the micro-USB cable from any USB power source when the included 18650 Li-ion battery is used.

Headlamp Light Size:
Length: 2.4” (60mm)
Width: 2.1” (54mm)
Height: 1.3” (32.5mm)

Battery Case:
Length: 3.2” (82.5mm)
Width: 2.0” (50mm)
Height: 1.4” (35mm)

Headlamp Weight: 6.5 oz. (183.5g) excluding battery

Batteries: One 18650 rechargeable Li-ion battery (included) or two CR123A batteries

Included: Fenix ARB-L18-2600 Li-ion battery, micro-USB charging cable, spare O-ring

Warranty: Limited Lifetime Guarantee from Fenix Lighting U.S

Impact resistance : 1m
Waterproof : IPX-6

The spotlight uses Cree XM-L2 U2 white light LED, floodlight uses Cree XP-G2 R5 neutral white light LED, with a lifespan of 50,000 hours
Powered by one 18650 rechargeable Li-ion battery or 2 two CR123A batteries
Digitally regulated output maintains constant brightness
Dual switch controls the spotlight and floodlight separately
Soft floodlight beam with max beam angle of 90°
60-degree tilt mechanism adjusts the beam where needed
Reverse polarity protection protects from improper battery installation
Lamp body made of aluminum alloy provides optimal heat dissipation
Intelligent over-heat protection to avoid high temperature of the surface
Intelligent memory circuit automatically memorizes the last-used brightness level
Micro-USB charging port (5V/1.3A , available in 18650 batteries)
Battery level indicator reminds when battery replacement is needed

Battery Level Indicator

With the lamp off, single-click the to activate the battery level indicator, and it will last three seconds.

  • Floodlight flashes: more than 70%

  • Floodlight and Red light flash alternately: between 30% and 70%

  • Red light flashes: lower than 30%

Note: With the light on, if the Red light flashes automatically, it indicates that the battery power is critical, please replace the battery or recharge the lamp soon as possible.

  • Uncover the USB cap, then plug the Micro-USB port of the charging cable into the USB power supplier.

  • The indicator light goes red when in charging process.

  • The indicator turns green when charging is completely done.

  • Pluck the charging cable and then plug the USB cap covered.

Note: The charging function only works on 18650 Li-ion batteries.

Intelligent Over-heat Protection

The headlamp will accumulate a lot of heat when it is working at high output levels. To avoid high temperature of lamp surface.
  • When the lamp is overheated up to 65°C or above, the lamp will automatically adjust the output to prevent the lamp from overheating.

  • When the temperature reduces, the output will return back to previously used output level.

  • During this process, if full-power working is needed, please click the corresponding switch once again.

Battery Replacement
Unscrew the tail cap to insert the battery with the anode side (+) towards the lamp head, and then screw the tail cap.

Headlamp Strap Assembling
Attach the headband to the headlamp as shown by first sliding the band down to the bottom of the slots, then hook the top edge under the top slot.

Warning: 18650 Li-ion batteries are power cells designed for commercial applications and must be treated with caution and handled with care. Quality batteries with circuit protection will reduce the potential risk for combustion or explosion but cell damage or short circuiting are potential risks the user assumes.

Usage and Maintenance
  • Disassembling the sealed head can cause damage to the headlamp and will void the warranty..

  • Excellent quality Fenix Li-ion batteries are strongly recommended for this high-power lamp..

  • Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare..

  • Periodic cleaning of the battery contacts improves the performance of the headlamp as dirty contacts may cause the headlamp to flicker, shine intermittently or even fail to illuminate for the following reasons:.

Reason A: The batteries need replacing.
Solution: Replace batteries (Please confirm the correct installation of anode and cathode).

Reason B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don’t work, please refer to the warranty policy before contacting your authorized distributor.

NOTE: you will get the opportunity to review this order, before submitting it.